Sandar/Sanda Mai Tauri ta Chrome

Tallace-tallacen JINYO da sandar chrome mai tauri ta musamman, sandar chrome mai rufi, bututun da aka yi wa ado, bututun da aka zana mai sanyi, ganga silinda mai amfani da ruwa, shaft mai layi.

Karfe Grade: JIS G4105(SCM440), CK45, S45C, CSAE4140, 42CrMO4, Sus304, SuS316, J1S STKM13C
Girman: φ6mm-φ360mm(φ1/4”-φ15”)
Kauri na Chrome: 20μm(min)
Tsawon: 3m-6m ko kuma an keɓance shi

Tuntube mu

Info@jinyoindustry.com

cikakkun bayanai game da samfurin

Gabatarwar Samfuri

JINYO kamfani ne mai haɗa bincike da ci gaba, samarwa, tallace-tallace da sabis. Kasuwancinsa ya ƙunshi fannoni na watsawa ta ruwa, bututun ƙarfe masu daidaito da kayan haɗin injinan injiniya. Kamfanin yana amfani da fasahar injinan niƙa mai zurfi, yana da ƙwarewa ta musamman ta samarwa da sarrafawa don sandar da aka keɓance ta chrome, sandar chrome mai tauri, sandar piston ta hydraulic da bututun silinda mai hydraulic, bututun honed, bututun SRB, kuma ya himmatu wajen samar da mafi girman ma'auni na inganci da mafi kyawun sabis a duk duniya.

Sandar ƙarfe mai tauri wacce aka yi wa fenti da chrome, samfurin ƙarfe ne mai zagaye da aka yi wa fenti da chromium wanda ake amfani da shi azaman kayan sandar piston a duk aikace-aikacen yau da kullun a cikin injinan hydraulics da pneumatics.

Za mu iya keɓance Hard Chrome Plated Bar ko Hard Chrome Plated Shaft bisa ga takamaiman buƙatunku.

BAYANI:

· Karfe: JIS G4105(SCM440), CK45, S45C, CSAE4140, 42CrMO4, Sus304, SuS316, J1S STKM13C

Daidaiton diamita na waje: f7, f8

·Tsaurin saman: Max Ra 0.2μm

*Kauri Mai Tauri na Chrome:

Taurin Surface: Min HV 850

· Daidaito

·Tsauri: Ra0.2μm(max)

· Tsawon Daidaitacce; 3m-9m ko kuma an keɓance shi

Girman Daidaitacce: φ6mm-φ360mm(φ1/4”-φ15”)

· Bayan an buƙata, ana kashe wutar lantarki da kuma rage zafi

Bayanin Samfurin

Ta yaya ake ƙera sandar chrome plated?

Ana yin wannan samfurin galibi daga sandunan ƙarfe masu zagaye, ta hanyar amfani da hanyoyin niƙa da gogewa marasa tsakiya, sannan a shafa masa chrome zuwa wani kauri na plating kamar min. microns 20 (0.0008″), min. microns 25 (0.001″), min. 50μm (0.002″) da sauransu.

Sandar ƙarfe mai tauri samfurin ƙarfe ne mai zagaye da aka yi da chromium wanda ake amfani da shi azaman kayan sandar piston a duk aikace-aikacen yau da kullun a cikin injinan hydraulic da pneumatic. Ana samun aikace-aikacen da aka fi so a cikin manyan motocin juji, masu ɗagawa, masu daidaita shara, cranes, injinan noma da kayan aikin samarwa tare da sassa masu motsi. Ana amfani da sandunan chromed da sandunan a matsayin sandunan piston (sandunan silinda), wanda shine muhimmin sashi a cikin silinda na hydraulic da silinda na pneumatic. Babban aikin canza wutar lantarki ta hydraulic zuwa motsi mai layi yayin hana shigar da kafofin watsa labarai masu lalata cikin tsarin hydraulic zai ƙayyade jerin buƙatu akan sandar.

Kamar yadda sandar/sandar da aka yi wa fenti mai siffar chrome galibi ana amfani da ita azaman shafts na silinda na hydraulic, shafts na silinda na pneumatic da sauran shafts na injina, don haka ana kiransu da Shafts na Hard Chrome Plated suma.

JINYO a matsayinta na ƙwararren mai kera sandunan chrome, tana amfani da fasahar zamani da kayan aiki masu inganci don ƙera sandunan chrome, sandunan chrome da sandunan chrome masu rami, waɗanda ake samu a girma dabam-dabam da ƙayyadaddun bayanai. Bugu da ƙari, za mu iya samar da sandunan piston na musamman don biyan buƙatun abokan ciniki daban-daban na masana'antu.

Sigogin samfurin

Girman	0.D6mm-360mm
Kayan Aiki	JIS G4105(SCM440), CK45, S45C, CSAE4140, 42CrMO4, Sus304, SuS316
Juriya ta OD	ISO f7
Kauri na Chrome	20-30μm(min
Taurin Layer ɗin Chrome	850HV(minti)
Taurin kai	Ra0.2um (mafi girma)
Ƙarfin Ba da Kyauta	≥350 Mpa
Ƙarfin Taurin Kai	≥580 MPa
Daidaito	0.2/1000mm
Ƙarawa	≥15%
Tsawon	3-9m ko Musamman bisa ga al'ada
Yanayin wadata	1. An yi wa fenti mai tauri chrome
	2. Induction ya taurare
	3. An kashe & An hura wuta
	4. Induction ta taurare tare da Q&T